Le Content Card sono i biglietti dei corsi che puoi trovare e acquistare direttamente nei negozi e nelle rivendite agrarie. Ciascuna Card ha un codice da riportare nel riquadro sottostante per confermare la tua iscrizone al corso, dopo averlo già acquistato in negozio.
How to correctly install the Geyser Pro?
Guide to installing the Geyser Pro mister
1. Correct device installation
During installation, it is crucial to keep the device leveled to ensure proper sensor operation, following the instructions to level it. A correct installation is essential for optimal performance.
2. Choosing the position
Choose a strategic location for the mister, considering the area to be treated. Ensure that the device is easily accessible, but also protected from the elements to prevent product wear and excessive internal overheating caused by direct sunlight, which would reduce the effectiveness of the concentrated liquids.
If the device needs to be wall-mounted, use the appropriate brackets (sold separately). Check out the L-mounting bracket for Geyser Pro for a practical solution. Watch the video!
Mit dem Laden des Videos akzeptieren Sie die Datenschutzerklärung von Vimeo.
Mehr erfahren
3.Type of installation (Ring or Linear)
Decide on the most suitable type of installation:
Ring system: Ideal for uniform coverage and optimal pressure distribution across the entire system.
Linear system: Ideal for areas that require targeted protection along a specific perimeter.
Watch the video and create the system that suits you best!
Mit dem Laden des Videos akzeptieren Sie die Datenschutzerklärung von Vimeo.
Mehr erfahren
4. System composition
Select the right components, such as pipes and nozzles, based on the area to cover. For the Geyser Pro (Art. 415), the number of nozzles ranges from a minimum of 15 to a maximum of 60, with a distance of 4 meters between the nozzles. For a system with the Geyser Pro Lite, the minimum number of nozzles is 10 and the maximum is 25.
Note that to make the best use of the pressure exerted by the Geyser, it is recommended to install the 8mm pipe (Art. 4248) for the first 25-30 meters of the system (starting from the Geyser Pro), on which you can already install nozzles. Watch the video!
Mit dem Laden des Videos akzeptieren Sie die Datenschutzerklärung von Vimeo.
Mehr erfahren
5. Mounting supports
Ensure you have the necessary supports to mount the pipe, such as on fences, poles, or other structures. The right supports are essential to guarantee the stability and proper positioning of the system.
6 Connection to water and electricity network
Consult our guide link for connecting to the water network.
If you want to power the Geyser through an external 220V power supply, find more information in the dedicated link to the Geyser power supply AC 220 V-DC 21 V (Art. 327).
7. Maintenance and optimization
Remember that a correct installation is only the first step: to keep your mister in perfect condition, periodically check the functionality of the nozzles and the water network.
By following these simple steps, you will ensure effective misting for your system!
