Le Content Card sono i biglietti dei corsi che puoi trovare e acquistare direttamente nei negozi e nelle rivendite agrarie. Ciascuna Card ha un codice da riportare nel riquadro sottostante per confermare la tua iscrizone al corso, dopo averlo già acquistato in negozio.
How to correctly install the Geyser Pro tubes and nozzles?
Proper installation of tubes and nozzles is essential to ensure the maximum efficiency of the Geyser Pro system. Here’s a practical guide to optimally position all components:
1. Where to install the tubes?
Tubes can be installed in different ways, depending on the layout of the area you want to protect.
On fences, railings or perimeter walls
This is the most common solution. It provides excellent perimeter coverage and an even mist distribution.
On the ground or ground level
In this case, the nozzles must be properly oriented to avoid dispersion and ensure effective diffusion. This method is not recommended in areas with heavy rain or frequent foot traffic (e.g., walked-on lawns or pathways).
2. How to fix the tubes?
Use appropriate fasteners (such as clips or cable ties), depending on the type of structure. Keep the tubing taut and stable, avoiding bends that could block the liquid flow.
3. Where and at what height to place the nozzles?
Install the nozzles along the garden perimeter, near hedges, fences, or existing structures.
-
Recommended height: between 1 m and 1.5 m above the ground, to effectively target adult mosquitoes.
Angle the nozzle 45 degrees towards the direction of treatment. Alternatively, use the nozzle extension pole (Art. 4255), made of steel and pre-angled.
4. Distance between nozzles
Nozzles should be placed about 4 meters apart, as per technical specifications. Plan their position carefully to avoid leaving any gaps in coverage.
